Cockpit Reference Guide

Embraer Prodigy
®
Touch Flight Deck 300 Cockpit Reference Guide
190-01536-00 Rev. A
42
Nav/Com/XPDR/Audio Panel
Flight
InstrumentsEAS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
Performing the system log-on:
1) After performing the previous Logon Setup procedure, verify the Link Status
display indicates a link with a ground station is available. An available link
is indicated by a green line between the aircraft symbol and the ground
station antenna symbol.
2) Touch the Logon Button. The Link Status display indicates ‘Connecting’
with an animated dashed green line between the ground station antenna
symbol and the ATC facility symbol. Touching the Cancel Button will
terminate the log-on process. When connection is complete, the display
indicates ‘Connected’ with an solid green line between the ground station
antenna symbol and the ATC facility symbol.
Creating a Message
Creating a message consists of choosing from a pre-determined list of requests,
entering the required information, and sending the request.
1) From the Home Screen, touch CPDLC.
2) Touch the Create Message Button. A list of requests is presented for
selection.
3) Select one of the Message Types from the list. For this example, Request
Level is chosen. A window is displayed for entering further information.
4) Touch the Request Level Button on the New CPDLC Message Screen. The
Altitude Entry display is shown.
5) Select the desired altitude mode by touching the Flight Level or FT (feet)
Button. A green annunciator indicates the selected mode.
6) Using the number keys, enter the altitude to be requested.
7) Touch the Enter Button. The requested altitude is displayed.
8) Touch the Reason Button. A list of pertinent reasons is presented.
9) Touch the desired reason.
10) Touch the Send Button.