Cockpit Reference Guide

Embraer Prodigy
®
Touch Flight Deck 300 Cockpit Reference Guide
190-01536-00 Rev. A 29
Nav/Com/XPDR/Audio Panel
Flight
Instruments EAS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
Disabling COM3 voice communication:
1) Touch the Audio & Radios Button to display the Audio & Radios Screen.
2) If necessary, scroll to find COM3.
3) Touch the COM3 Frequency Button.
4) Touch the Datalink Button to disable COM3 voice communication.
Or:
1) From Home, touch the CPDLC Button to display the CPDLC Screen.
2) Touch the OK Button in response to “Switch Radio to Data Mode?”. To
cancel the request, touch the Cancel Button.
COM FREQUENCY TUNING
Selecting a COM1/2 frequency:
1) Touch the COM1 STBY Button or COM2 STBY Button in the CNS Bar to
display the COM1/COM2 Standby Screen.
2) Use the keypad to select the frequency.
3) Touch the Enter Button to accept the new frequency as the COM1/COM2
standby frequency; or touch the XFER Button to accept the new frequency
as the COM1/COM2 active frequency and transfer the previously active
frequency to the standby frequency.
Or:
1) Press the small right knob to select the COM desired for tuning (selected
standby frequency is light blue).
2) Turn the large and small right knobs to tune the frequency (Large knob
increases/decreases MHz; Small knob increases/decreases kHz).
3) Press the small right knob to enter the new frequency as the standby
frequency; or press and hold the small right knob to transfer the new
standby frequency to the active frequency.
Or:
1) Touch the Audio & Radios Button to display the Audio & Radios Screen.
2) Touch the COM1/COM2 volume slider, or press the small right knob, to
select COM1/COM2 for tuning.
3) Turn the large and small right knobs to select the frequency (Large knob
increases/decreases MHz; Small knob increases/decreases kHz).