Cockpit Reference Guide

Embraer Prodigy
®
Touch Flight Deck 300 Cockpit Reference Guide
190-01536-00 Rev. A 11
Engine & Airframe Systems
Flight
Instruments EAS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
Setting the Outside Air Temperature (OAT):
1) From Home, touch Aircraft Systems > Engine Settings
2) Touch Set Data, then touch OAT.
3) Use the keypad to enter the OAT and touch the Enter button to confirm
the new OAT.
4) To confirm the selected takeoff settings, touch the Send Data Button.
Or :
To cancel the operation, touch BACK or Home.
On aircraft electrical power-up, Automatic Thrust Reserve (ATR) is enabled by
default. ATR status is shown at the top of the EIS Display.
Indication* Description
ATR ATR enabled in both engines
ATR ATR armed in both engines, but inactive
TO - RSV ATR activated in at least one engine
GA - RSV ATR activated in at least one engine in
Go-Around Mode
* When no indication is shown, ATR has not been enabled or armed
in both engines.
Automatic Thrust Reserve (ATR) Status
Disabling/enabling Automatic Thrust Reserve (ATR):
1) From Home, touch Aircraft Systems > Engine Settings
2) Touch Set Data.
3) Touch the Auto Thrust Reserve Button to enable/disable (green indicates
enabled).
4) If desired, change the OAT while the Takeoff Data Set Window is displayed.
5) To confirm the selected takeoff settings touch the Send Data Button,
Or :
To cancel the operation, touch BACK. or Home