Cockpit Reference Guide
Embraer Prodigy
®
Touch Flight Deck 300 Cockpit Reference Guide
190-01536-00 Rev. A 5
Flight Instruments
Flight
Instruments EAS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
CHANGING VSPEEDS AND TURNING VSPEED FLAGS ON/OFF
1)
From the Home Screen on the Touchscreen Speed Bugs.
2)
To turn the Vspeed on or off, touch the On Button . The illuminated green
line below “On” indicates that the Vspeed flag is on.
3)
To set or change a Vspeed value, touch the Data Field for the Vspeed, enter
a value in the keypad, and touch
Enter.
The pencil icon next to the Vspeed
value indicates that the Vspeed is a pilot-entered value.
TURNING ALL VSPEED FLAGS ON/OFF
1)
From the Home Screen on the Touchscreen Controller, touch Speed Bugs.
2)
To enable all Vspeed flags, touch the All Bugs On Button.
3)
To remove all Vspeed flags, touch the All Bugs Off Button.
RESTORING ALL VSPEED DEFAULTS
1)
From the Home Screen on the Touchscreen Controller, touch Speed Bugs.
2)
Touch the Restore All Defaults Button.
SETTING THE BARO TRANSITION ALERT
1)
From the Home Screen, touch Utilities > Setup > Avionics Settings.
2)
Touch the Alerts Tab.
•
To turn the alert on or off, touch the Baro Transition Alert Enable
Button. An illuminated green line below “Enable” indicates that the alert is
on.
•
To set or change the Baro Transition Alert Altitude, touch the Baro
Transition Alert Data Field. Enter the desired altitude on the keypad, and
touch Enter.