Cockpit Reference Guide

Embraer Prodigy
®
Touch Flight Deck 300 Cockpit Reference Guide
190-01536-00 Rev. A
Appendix
162
Flight
InstrumentsEAS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
Flight Plan Import/Export
Results
Description
‘Flight plan import failed.’ Flight plan data was not successfully imported from the
SD card.
‘Flight plan partially imported.’ Some flight plan waypoints were successfully imported
from the SD card, however others had errors and were
not imported. A partial stored flight plan now exists in
the system.
‘File contained user waypoints
only.’
The file stored on the SD card did not contain a flight
plan, only user waypoints. In addition, one or more of
these waypoints may not have imported successfully.
‘Too many points. Flight plan
truncated.’
The flight plan on the SD card contains more waypoints
than the system can support. The flight plan was
imported with as many waypoints as possible.
‘Some waypoints not loaded.
Waypoints locked.’
The flight plan on the SD card contains one or more
waypoints the system cannot find in the navigation
database. The flight plan has been imported, but must
be edited within the system before it can be activated
for use.
‘User waypoint database full.
Not all loaded.’
The flight plan file on the SD card contains user
waypoints. The quantity of stored user waypoints has
exceeded system capacity, therefore not all the user
waypoints on the SD card have been imported. Any
flight plan user waypoints that were not imported are
locked in the flight plan. The flight plan must be edited
within the system before it can be activated for use.
‘One or more user waypoints
renamed.’
One or more imported user waypoints were renamed
when imported due to naming conflicts with waypoints
already existing in the system.
‘Flight plan successfully
exported.’
The stored flight plan was successfully exported to the
SD card.
‘Flight plan export failed.’ The stored flight plan was not successfully exported
to the SD card. The SD card may not have sufficient
available memory or the card may have been removed
prematurely.