Cockpit Reference Guide

Embraer Prodigy
®
Touch Flight Deck 300 Cockpit Reference Guide
190-01536-00 Rev. A
Appendix
160
Flight
InstrumentsEAS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
System Message Comments
NON WGS84 WPT – Do not use
GPS for navigation to [xxxx]
The position of the selected waypoint [xxxxx] is not
calculated based on the WGS84 map reference datum
and may be positioned in error as displayed. Do not
use GPS to navigate to the selected non-WGS84
waypoint.
TRAFFIC FAIL – Traffic device
has failed.
The system is no longer receiving data from the traffic
system. The traffic device should be serviced.
FAILED PATH – A data path
has failed.
A data path connected to the GDU or the GIA has
failed.
MAG VAR WARN – Large
magnetic variance. Verify all
course angles.
The GDU’s internal model cannot determine the exact
magnetic variance for geographic locations near the
magnetic poles. Displayed magnetic course angles may
differ from the actual magnetic heading by more than 2°.
USER MAG VAR – User
magnetic variation is active.
User entered magnetic variation is being used for
system calculations.
SCHEDULER [#] – <message>. Message criteria entered by the user.
SVT DISABLED – Out of
available terrain region.
Synthetic Vision is disabled because the aircraft is not
within the boundaries of the installed terrain database.
SVT DISABLED – Terrain DB
resolution too low.
Synthetic Vision is disabled because a terrain database
of sufficient resolution (9 arc-second or better) is not
currently installed.
TERRAIN DISABLED – Terrain
Awareness DB resolution too
low.
TAWS is disabled because a terrain database of
sufficient resolution (9 arc-second or better) is not
currently installed.
TRN AUD FAIL – Trn Awareness
audio source unavailable.
TAWS is disabled because an aural alert audio source is
unavailable.
TERRAIN AUD CFG – Trn
Awareness audio config error.
Service req’d.
TAWS is disabled because the audio configuration is
invalid. The system should be serviced.
CHECK CRS – Database course
for LOC1 / [LOC ID] is [CRS]°.
Selected course for LOC1 differs from published
localizer course by more than 10 degrees.
CHECK CRS – Database course
for LOC2 / [LOC ID] is [CRS]°.
Selected course for LOC2 differs from published
localizer course by more than 10 degrees.