Cockpit Reference Guide

Embraer Prodigy
®
Touch Flight Deck 300 Cockpit Reference Guide
190-01536-00 Rev. A
Appendix
158
Flight
InstrumentsEAS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
MISCELLANEOUS SYSTEM MESSAGES
System Message Comments
FPL WPT LOCK – Flight plan
waypoint is locked.
Upon power-up, The system detects that a stored flight
plan waypoint is locked. This occurs when an aviation
database update eliminates an obsolete waypoint. The
flight plan cannot find the specified waypoint and flags
this message. This can also occur with user waypoints
in flight plans that are deleted.
Remove the waypoint from the flight plan if it no longer
exists in any database, or update the waypoint name/
identifier to reflect the new information.
FPL WPT MOVE – Flight plan
waypoint moved.
The system has detected that a waypoint coordinate
has changed due to a new navigation database update.
Verify that stored flight plans contain correct waypoint
locations.
TIMER EXPIRD – Timer has
expired.
The system notifies the pilot the timer has expired.
DB CHANGE – Database
changed. Verify user modified
procedures.
This occurs when a stored flight plan contains
procedures that have been manually edited. This
alert is issued only after a navigation database update.
Verify the user-modified procedures in stored flight
plans are correct and current.
DB CHANGE – Database
changed. Verify stored airways.
This occurs when a stored flight plan contains an
airway that is no longer consistent with the navigation
database. This alert is issued only after a navigation
database update. Verify use of airways in stored flight
plans and reload airways as needed.
FPL TRUNC – Flight plan has
been truncated.
This occurs when a newly installed navigation database
eliminates an obsolete approach or arrival used by a
stored flight plan. The obsolete procedure is removed
from the flight plan. Update flight plan with current
arrival or approach.
WPT ARRIVAL – Arriving at
waypoint - [xxxx]
Arriving at waypoint [xxxx], where [xxxx] is the
waypoint name.
STEEP TURN – Steep turn
ahead.
A steep turn is 15 seconds ahead. Prepare to turn.