Cockpit Reference Guide

Embraer Prodigy
®
Touch Flight Deck 300 Cockpit Reference Guide
190-01536-00 Rev. A 1
Flight Instruments
Flight
Instruments EAS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
FLIGHT INSTRUMENTS
SELECTING THE ALTIMETER BAROMETRIC PRESSURE SETTING
Turn the BARO Knob to select the desired setting.
SELECTING STANDARD BAROMETRIC PRESSURE
Press the BARO Knob to select standard pressure; STD BARO is displayed
in the Barometric Setting box.
CHANGING ALTIMETER BAROMETRIC PRESSURE SETTING UNITS
1) Press the PFD Settings Softkey on the PFD to display the second-level
softkeys.
2) Press the Altitude Units Softkey.
3) Press the IN Softkey to display the barometric pressure setting in inches of
mercury (in Hg).
Or , press the HPA Softkey to display the barometric pressure setting in
hectopascals (hPa).
4) Press the Back Softkey to return to the previous level softkeys.
SETTING THE SELECTED ALTITUDE
Turn the ALT Knob on the AFCS Controller to set the Selected Altitude in
100-ft increments. When meters are displayed, Selected Altitude is adjusted
in 50 meter increments..
If set, the Minimum Descent Altitude/Decision Height (MDA/DH) value is
also available for the Selected Altitude.
If desired, press the ALT SEL Knob to synchronize the Selected Altitude
with the displayed altitude to the nearest 10 ft.