Cockpit Reference Guide

Embraer Prodigy
®
Touch Flight Deck 300 Cockpit Reference Guide
190-01536-00 Rev. A
148
Annunciations & Alerts
Flight
InstrumentsEAS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
System Message Comments
NAV1 SERVICE – NAV1 needs
service. Return unit for repair.
A failure has been detected in the NAV1 and/or NAV2
receiver. The receiver may still be available. The system
should be serviced.
NAV2 SERVICE – NAV2 needs
service. Return unit for repair.
NAV1 RMT XFR – NAV1
remote transfer key is stuck.
The remote NAV1 and/or NAV2 transfer switch is stuck
in the enabled (or “pressed”) state. Press the transfer
switch again to cycle its operation. If the problem
persists, the system should be serviced.
NAV2 RMT XFR – NAV2
remote transfer key is stuck.
NAV1 MANIFEST – NAV1
software mismatch,
communication halted.
The NAV 1 and/or NAV 2 has incorrect software
installed. The system should be serviced.
NAV2 MANIFEST – NAV2
software mismatch,
communication halted.
G/S1 FAIL – G/S1 is inoperative.
A failure has been detected in glideslope receiver 1 and/
or receiver 2. The system should be serviced.
G/S2 FAIL – G/S2 is inoperative.
G/S1 SERVICE – G/S1 needs
service. Return unit for repair.
A failure has been detected in glideslope receiver 1 and/
or receiver 2. The receiver may still be available. The
system should be serviced when possible.
G/S2 SERVICE – G/S2 needs
service. Return unit for repair.
GEA 71 ENGINE/AIRFRAME UNIT SYSTEM MESSAGES
Message Comments
GEA1 CONFIG – GEA1 config
error. Config service req’d.
The GEA1 configuration settings do not match those of
backup configuration memory. The system should be
serviced.
GEA2 CONFIG – GEA2 config
error. Config service req’d.
The GEA2 configuration settings do not match those of
backup configuration memory. The system should be
serviced.