Cockpit Reference Guide

Embraer Prodigy
®
Touch Flight Deck 300 Cockpit Reference Guide
190-01536-00 Rev. A
146
Annunciations & Alerts
Flight
InstrumentsEAS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
System Message Comments
GIA1 MANIFEST – GIA1
software mismatch,
communication halted.
The GIA1 and/or GIA 2 has incorrect software installed.
The system should be serviced.
GIA2 MANIFEST – GIA2
software mismatch,
communication halted.
GFC MANIFEST – GFC software
mismatch, communication halted.
Incorrect servo software is installed, or gain settings are
incorrect.
COM1 TEMP – COM1 over temp.
Reducing transmitter power.
The system has detected an over temperature condition
in COM1 and/or COM2. The transmitter operates at
reduced power. If the problem persists, the system
should be serviced.
COM2 TEMP – COM2 over temp.
Reducing transmitter power.
COM1 CONFIG – COM1 config
error. Config service req’d.
The COM1 and/or COM2 configuration settings do
not match backup configuration memory. The system
should be serviced.
COM2 CONFIG – COM2 config
error. Config service req’d.
COM1 SERVICE – COM1 needs
service. Return unit for repair.
The system has detected a failure in COM1 and/or
COM2. COM1 and/or COM2 may still be usable. The
system should be serviced when possible.
COM2 SERVICE – COM2 needs
service. Return unit for repair.
COM1 MANIFEST –
COM1 software mismatch,
communication halted.
The COM 1 and/or COM 2 has incorrect software
installed. The system should be serviced.
COM2 MANIFEST –
COM2 software mismatch,
communication halted.
COM1 PTT – COM1 push-to-
talk key is stuck.
The COM1 and/or COM2 external push-to-talk switch
is stuck in the enable (or “pressed”) position. Press the
PTT switch again to cycle its operation. If the problem
persists, the system should be serviced.
COM2 PTT – COM2 push-to-
talk key is stuck.