Pilot's Guide

Garmin G2000 Pilot’s Guide for the Cessna T240
190-01263-02 Rev. A238
Flight ManageMent
SYSteM
OVeRVieW
Flight
inStRUMentS
eiS
aUDiO Panel
& CnS
Flight
ManageMent
haZaRD
aVOiDanCe
aFCS
aDDitiOnal
FeatUReS
aPPenDiCeSinDeX
Selecting the active flight plan waypoint as the direct-to destination:
1) From Home, touch ¯ to choose the active flight plan waypoint as the direct-to destination, and return to the
Direct To Screen.
2) Touch the Activate ¯ Button to activate the direct-to.
Or:
1)
From Home, touch Flight Plan.
2) Touch ¯ button to choose the active flight plan waypoint as the direct-to destination, and return to the
Direct To Screen.
3) Touch the Activate ¯ Button to activate the direct-to.
Selecting the active flight plan waypoint as the direct-to destination using the GDU Controller:
1) On the GDU Controller, press the ¯ Button to display the Direct To Window.
2) Press the ENT Key or the small PFD Knob to accept the selection and move the cursor to the ACTIVATE? field.
3) Press the ENT Key or the small PFD Knob to activate the direct-to.
Any waypoint contained in the active flight plan can be selected as a direct-to waypoint from the Active Flight
Plan Window on the PFD. Also, any NRST, RECENT, or USER waypoint can be selected as a direct-to waypoint
from the Active Flight Plan Window on the PFD. This is done via the Waypoint Submenu.
Figure 5-79 Waypoint Submenu
Waypoint Submenu
- Flight Plan Waypoints
- Nearest Airports
- Recent Waypoints
- User Waypoints
Any FPL, NRST, RECENT, or USER waypoint can be selected as a direct-to destination in the Direct To Window
on the PFD.
Selecting a FPL, NRST, RECENT, or USER waypoint as a direct-to destination using the GDU
Controller:
1) Press the ¯ Key. The Direct To Window is displayed (with the active flight plan destination as the default
selection or a blank destination if no flight plan is active).
2) Turn the small PFD Knob counter-clockwise one click to display a list of flight plan waypoints (the FPL list is
populated only when navigating a flight plan).
3) If necessary, turn the small FMS Knob clockwise to display the NRST, RECENT, or USER waypoints.
4) Turn the large FMS Knob clockwise to select the desired waypoint.
5) Press the ENT Key. The cursor is now displayed on ‘ACTIVATE?’.
6) Press the ENT Key again to activate the direct-to.