Pilot's Guide

190-01255-01 Rev. A
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
87
ENGINE INDICATION & CREW ALERTING SYSTEM
3.3 ENGINE PAGE
NOTE : Refer to the Rotorcraft Flight Manual (RFM) for engine operating limitations and corrective actions.
Pressing the ENGINE Softkey on the MFD accesses the EIS - Engine Page, which displays all engine, electrical,
fuel, alerts, and power assurance calculations. To return to the previous softkey level and exit the Engine page,
press the ENGINE Softkey again, or press the CLR Key, or turn the large FMS Knob. The Engine Page is not
available in reversionary mode.
Press the ENGINE Softkey again
to return to the top level softkeys.
ENGINE
CAS
ENGINE
CAS
PWR CHK
HOV PWR OGE IGE HOV-P
Figure 3-7 EIS Softkeys (MFD)
• ENGINE
Displays the Engine page and softkeys; press again to return to the previous page
CAS
Scrolls up one message in the Alerts window on the MFD
CAS
Scrolls up one message in the Alerts window on the MFD
PWR CHK
Performs a power assurance check
HOV PWR
Performs a Hover Performance Power Check
OGE
Performs a OGE (Out of Ground Effect) Hover Performance Power Check
IGE
Performs a IGE (In Ground Effect) Hover Performance Power Check
HOV-P
Enables Hover Prediction Mode
* Softkey disabled until 19 or more alerts are displayed.