Pilot's Guide

Garmin G1000H
™
Pilot’s Guide for the Bell 407GX 190-01255-01 Rev. A 513
ADDITIONAL FEATURES
4) Turn the small FMS Knob to highlight the first digit, as shown in Figure 8‑128.
Figure 8-128 Set Transmission Rate
5) Again, turn the small FMS Knob to enter the desired number.
6) Turn the large FMS Knob to highlight the second digit.
7) Turn the small FMS Knob to enter the desired number.
8) Press the ENT Key. The selection is entered and the cursor is placed in the PASSENGERS ON BOARD field.
9) Turn the small FMS Knob left or right to select ‘YES’ or ‘NO’, as shown in Figure 8‑129.
Figure 8-129 Set Transmission Rate
10) Press the FMS Knob to remove the cursor.
To send a position report manually:
1) Turn the large FMS Knob on the MFD to select the AUX page group.
2) Turn the small FMS Knob to select AUX‑CONNEXT Page.
3) Press the SEND RPT Softkey, as seen in Figure 8‑126.