Pilot's Guide

Garmin G1000H
™
Pilot’s Guide for the Bell 407GX 190-01255-01 Rev. A512
ADDITIONAL FEATURES
Viewing the Connext Page:
1) Turn the large FMS Knob on the MFD to select the AUX page group.
2) Turn the small FMS Knob to select AUX‑CONNEXT Page as seen in Figure 8‑126.
Figure 8-126 AUX-CONNEXT Page
Setting up Position Reporting:
1) With the AUX‑CONNEXT Page displayed, press the FMS Knob to display the cursor in the TRANSMISSION
PERIOD field as in Figure 8‑127.
Figure 8-127 Set Transmission Period
2) Turn the small FMS Knob to select ‘AUTO’ for automatic transmission of position reports or ‘OFF’ to allow only
manual transmission of position reports.
3) Press the ENT Key. The selection is entered and the cursor is placed in the TRANSMISSION RATE field.