Pilot's Guide

Garmin G1000H
™
Pilot’s Guide for the Bell 407GX 190-01255-01 Rev. A504
ADDITIONAL FEATURES
4) Press the ENT Key. The log files for the selected folder are displayed as seen in Figure 8‑108.
Figure 8-108 Select Desired Folder Name
5) Press the small FMS Knob to remove the cursor.
Selecting folder transmission settings:
1) While viewing the Maintenance Logs Page, press the FMS Knob to activate the cursor.
2) Turn the small FMS Knob to display the list of available folders.
3) Turn either FMS Knob to select the desired folder.
4) Press the ENT Key.
5) Press the MENU Key to display the Maintenance Logs Page Menu as in Figure 8‑109.
Figure 8-109 Select Folder Settings
6) Press the ENT Key to display the Folder Transmission Settings as shown in Figure 8‑110. Four different
transmission modes may be set. ‘TX MODE 1’ is the first transmit method the system will attempt to use when
sending data. If the system is unable to connect using the first method, the system will automatically attempt