Pilot's Guide

Garmin G1000H
™
Pilot’s Guide for the Bell 407GX 190-01255-01 Rev. A500
ADDITIONAL FEATURES
To edit a saved network:
1) While viewing list of saved networks, press the FMS Knob to activate the cursor as seen in Figure 8‑103.
2) Turn either FMS Knob to highlight the network to be edited.
3) Pressing the ENT Key at this point will check or uncheck the AUTO CONNECT checkbox. When a checkmark is
present, the system will automatically connect to the network when within range.
Figure 8-103 Select Network to be Edited