Pilot's Guide

Garmin G1000H
™
Pilot’s Guide for the Bell 407GX 190-01255-01 Rev. A 497
ADDITIONAL FEATURES
8.7 WI-FI CONNECTIONS
ThesystemcanconnecttoaIEEE802.11gcompatiblenetworkprovidedtheaircraftisonthegroundand
locatedwithinrange of the network.The system iscapableofWEP64, WEP128,WPA-PSK,andWPA2-PSK
encryptionformats.WPA-EnterpriseandWPA2-Enterprisearenotsupported.Connectionsthatrequireweb
proxies,captiveportals,orotherelementsthatrequireusercredentials,includingausernameandpasswordora
redemptionoraccesscode;orrequireactionsuchasacceptingauseragreement,arenotsupported.
ControlandmonitoringofWi-FifunctionsareaccomplishedthroughtheAUX-WI-FISETUPPage.
To view the Wi-Fi Setup Page:
1) Turn the large FMS Knob on the MFD to select the AUX page group.
2) Turn the small FMS Knob to select DATA LINK.
To set up a new Wi-Fi connection:
1) Press the AVAIL Softkey on the MFD. A list of available networks will be displayed in the AVAILABLE NETWORKS
window as shown in Figure 8‑98. Signal strength is shown for each network, as well as security requirements
and whether the network has been saved in the system’s memory.
Figure 8-98 Available Wi-Fi Networks
2) If necessary, press the RESCAN Softkey to have the system scan again for available networks.
Or:
a) Press the MENU Key to display the Page Menu.
b) Turn either FMS Knob to place the cursor on ‘Rescan Available Networks’.
c) Press the ENT Key.