Pilot's Guide

Garmin G1000H
™
Pilot’s Guide for the Bell 407GX 190-01255-01 Rev. A 491
ADDITIONAL FEATURES
a) Press the MENU Key to display the Page Menu.
b) Turn either FMS Knob to place the cursor on ‘Draft New Predefined Message’.
c) Press the ENT Key. The PREDEFINED SMS TEXT MESSAGE Window is now displayed as shown in Figure 8‑93.
Figure 8-93 Composing a Predefined Message
5) The cursor is displayed in the ‘TITLE’ field. Enter the desired message title. Entry can be accomplished through
the alphanumeric keys on the MFD Controller, or combination of the FMS Knob on the controller and softkeys
on the MFD. The FMS Knob is used to enter letters and numbers, or numbers can be entered from the MFD by
pressing the NUMBERS Softkey. Press the CAP LOCK Softkey to create upper and lower case alpha characters.
Special characters can be accessed by pressing the SYMBOLS Softkey.
6) Press the ENT Key. The cursor is now displayed in the ‘MESSAGE’ field.
7) Enter the desired message using any combination of entry methods as described in step 5.
8) Press the ENT Key.
9) Press the SAVE Softkey. The new predefined message is now shown in the displayed list. Pressing the CANCEL
Softkey will delete the message without saving.
10) Press the MENU Key to display the Page Menu.
11) Turn either FMS Knob to place the cursor on ‘Stop Editing Predefined Message’.
12) Press the ENT Key.
Sending a predefined text message:
1) While viewing the AUX‑TEXT MESSAGING Page, press the NEW Softkey.
2) The TEXT MESSAGE DRAFT Window is now displayed with the cursor in the ‘TO’ field. Enter the desired
telephone number or email address. Entry can be accomplished through the alphanumeric keys on the MFD