Pilot's Guide

Garmin G1000H
™
Pilot’s Guide for the Bell 407GX 190-01255-01 Rev. A 481
ADDITIONAL FEATURES
WhenviewingMFDpagesotherthantheAUX-TELEPHONEPage,apop-upalertsimilartoFigure8-81
willbedisplayedandanauralalert“IncomingCall”willbeheard.Thepop-upalertmaybeinhibitedat
times,suchasduringtakeoff.Inadditiontothepop-upalert,aringingphonesymbolwillbedisplayedto
therightoftheMFDpagetitleasshowninFigure8-81.Also,thevoicealert“IncomingCall”willbeheard
ontheselectedcockpitaudio.
Figure 8-81 Incoming Call
Incoming Call Pop-up Incoming Call Symbol on MFD Page
Answering an incoming call:
1) Press the TEL Key on the appropriate audio panel.
2) Press the ANSWER Softkey on the MFD.
Or:
While viewing the AUX‑TELEPHONE Page:
NOTE : The Push-to-Talk switch is not utilized for telephone communication. The microphone is active after
pressing the ANSWER Softkey, and stays active until the call is terminated.
1) Press the TEL Key on the appropriate audio panel.
2) Press the MENU Key to display the Page Menu.
3) Turn either FMS Knob to place the cursor on ‘Answer Incoming Call’.
4) Press the ENT Key.
PressingtheIGNORESoftkeywillextinguishthepop-upwindowandleavethecurrentcallunanswered.
PressingtheIGNRE ALLSoftkeywillextinguishthepop-upwindowforthecurrentandallfutureincoming
callsandleavethecurrentcallunanswered.PressingtheTELSoftkeywilldisplaytheAUX-TELEPHONE
Pageallowingadditionalcallinformationtobeviewedbeforeanswering.
Disabling incoming call alerts:
1) With the AUX‑TELEPHONE Page displayed, press the MENU Key on the MFD to display the Page Menu.
2) Turn either FMS Knob to place the cursor on ‘Disable Incoming Call Alerts’.
3) Press the ENT Key. The voice and pop‑up alert will not be displayed now when an incoming call is received.