Pilot's Guide

Garmin G1000H
Pilot’s Guide for the Bell 407GX
190-01255-01 Rev. A402
HAZARD AVOIDANCE
Figure 6-119 Traffic Map Page
Altitude
Mode
Proximity Traffic,
900’ Above,
Level, Flight ID
Displayed
“No Bearing”
Traffic (Bearing
Undetermined),
Distance 4.0
nm, 500’ Above,
Climbing
Non-Threat Traffic,
2500’ Above,
Descending
Traffic
Advisory Off-
Scale, 400’
Below, Level
Traffic Display
Range Rings
Non-Threat
Traffic,
Altitude Not
Reported
Non-Threat
Traffic with
ADS-B
Directional
Information,
6000’ Above,
Level
Traffic Advisory with ADS-B Directional
Information, 500’ Below, Climbing
Altitude
Mode
Displaying traffic on the Traffic Map Page:
1) Turn the large
FMS
Knob to select the Map Page Group.
2) Turn the small
FMS
Knob
to select the Traffic Map Page.
3) Select the OPERATE Softkey to begin displaying traffic. OPERATING is displayed in the Traffic mode field.
4) Select the STANDBY Softkey to place the system in the Standby mode. STANDBY is displayed in the Traffic
mode field.
5) Turn the RANGE Knob clockwise to display a larger area or counter-clockwise to display a smaller area.