Pilot's Guide

190-01255-01 Rev. A
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
401
HAZARD AVOIDANCE
OPERATION
Afterpower-up,thetrafcsystemisinStandbyMode.ThesystemmustbeinOperatingModefortrafcto
bedisplayedandforTAstobeissued.
Selecting theOPERATESoftkeyallowsthesystem toswitch fromStandby ModetoOperatingModeas
necessary.SelectingtheSTANDBY SoftkeyforcestheunitintoStandbyMode.
Switching from operating mode to standby mode:
On the Traffic Page, select the STANDBY Softkey
Or:
1) Press the MENU Key and turn the small FMS knob to select ‘Standby Mode’.
2) Press the ENT Key.
Switching from standby mode to operating mode:
On the Traffic Page, select the OPERATE Softkey
Or:
1) Press the MENU Key and turn the small FMS knob to select ‘Operate Mode’.
2) Press the ENT Key. The system switches from Standby Mode to Operating Mode as necessary.
TRAFFIC MAP PAGE
TheTrafcMapPageshowssurroundingtrafcdatainrelationtotheaircraft’scurrentpositionandaltitude,
withoutbasemapclutter.Itistheprincipalpageforviewingtrafcinformation.Aircraftorientationisalways
headingupunlessthereisnovalidheading.MaprangeisadjustablewiththeRANGE Knobfrom2to12nm,
asindicatedbythemaprangerings.
The traffic mode and altitude display mode are annunciated in the upper left corner of the page.