Pilot's Guide

190-01255-01 Rev. A
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
391
HAZARD AVOIDANCE
Or:
a) Press the MENU Key.
b) Select ‘Operate Mode’ (shown if TIS is in Standby Mode) and press the ENT Key.
Display
of System
Status
Figure 6-112 Traffic Map Page
Traffic Advisory,
300’ Above,
Descending
Non-Threat
Traffic, 5000’
Above,
Climbing
Traffic Advisory,
Off Scale Aircraft
is Out of Range,
1000’ Above and
Climbing
Non-Bearing Traffic (System is Unable to
Determine Bearing), Aircraft Distance is
7.0 nm, 500’ Above and Descending
Operating
Mode
Mutes “TIS Not
Available” Voice
Alert
Non-Threat
Traffic,
Non-Altitude
Reporting
“TIS Not
Available” Voice
Alert Mute
Status
TIS ALERTS
WhenthenumberofTAsontheTrafcMapPageincreasesfromonescantothenext,thefollowingoccur:
•Asingle“Traffic” voice alert is generated.
•A‘TRAFFIC’AnnunciationappearstothetopleftoftheAttitudeIndicatoronthePFD,ashingfor5seconds
andremainingdisplayeduntilnoTAsaredetectedinthearea.
•ThePFDInsetMapisautomaticallydisplayedwithtrafc.
Toreducethenumberofnuisancealertsduetoproximateaircraft,the“Traffic” voice alert is generated only
whenthenumberofTAsincreases.Forexample,whentherstTAisdisplayed,avoiceandvisualannunciation
aregenerated.AslongasasingleTAremainsonthedisplay,noadditionalvoicealertsaregenerated.Ifasecond
TAappearsonthedisplayorifthenumberofTAsinitiallydecreasesandthensubsequentlyincreases,another
voice alert is generated.