Pilot's Guide

Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
190-01255-01 Rev. A386
HAZARD AVOIDANCE
TheProlePathrectanglemaybeconguredonoroff,andtheNavigationMaprangeatwhichtheProle
Pathisremovedfrommapdisplaycanbechanged.
Customizing the Profile Path display on the Navigation Map Page:
1) Select the Navigation Map Page.
2) Press the MENU Key.
3) With ‘Map Setup’ highlighted, press the ENT Key (Figure 6-105).
4) Turn the small FMS Knob to select the ‘Profile’ Group and press the ENT Key (Figure 6-106).
5) Turn the large FMS Knob or press the ENT Key to scroll through product selections (Figure 6-107).
•PROFILE PATH – Turns the display of the Profile Path on or off and sets maximum map range at which the Profile
Path is shown
6) Turn the small FMS Knob to scroll through options (ON/OFF, range settings).
7) Press the ENT Key to select an option.
8) Press the FMS Knob or CLR Key to return to the Navigation Map Page with the changed settings.
Figure 6-106 Navigation Map Page Setup Menu
Figure 6-105 Navigation Map Page Menu
Figure 6-107 Navigation Map Page Setup Menu,
Profile Group