Pilot's Guide

190-01255-01 Rev. A Garmin G1000H
™
Pilot’s Guide for the Bell 407GX 18
SYSTEM OVERVIEW
Level 1 Level 2 Level 3 Description
STD BARO
Sets barometric pressure to 29.92 in Hg (1013 hPa if METRIC softkey is
selected)
OBS
Selects OBS mode on the CDI when navigating by GPS (only available
with active leg)
CDI
Cycles through GPS, VOR1, and VOR2 navigation modes on the CDI
DME
Displays the DME Tuning Window, allowing selection of the DME
XPDR
Displays transponder mode selection softkeys
STBY
Selects standby mode (transponder does not reply to any interrogations)
ON
Selects Mode A (transponder replies to interrogations)
ALT
Selects Mode C – altitude reporting mode (transponder replies to
identification and altitude interrogations)
GND
Allows manual selection of ground mode in certain conditions
VFR
Automatically enters the VFR code (1200 in the U.S.A. only)
CODE
Displays transponder code selection softkeys 0-7
0 — 7
Use numbers to enter code
IDENT
Activates the Special Position Identification (SPI) pulse for 18 seconds,
identifying the transponder return on the ATC screen
BKSP
Removes numbers entered, one at a time
IDENT
Activates the Special Position Identification (SPI) pulse for 18 seconds,
identifying the transponder return on the ATC screen
TMR/REF
Displays Timer/References Window
NRST
Displays Nearest Airports Window
MSG
Displays the Message Window
Figure 1-13 Top Level PFD Softkeys
MSGCAS
CAS ↓
CAS ↑