Pilot's Guide

Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
190-01255-01 Rev. A208
FLIGHT MANAGEMENT
When the database is updated, the airways need to be reloaded also. Each airway segment is reloaded from
thedatabasegiventheentrywaypoint,theairwayidentierandtheexitwaypoint.Thisreloadsthesequenceof
waypointsbetweentheentryandexitwaypoints(thesequencemaychangewhenthedatabaseisupdated).The
update of an airway can fail during this process. If that happens, the airway waypoints are changed to regular
(non-airway) flight plan waypoints, and an alert is displayed (see Miscellaneous Messages in Appendix A).
The following could cause the airway update to fail:
•Airwayidentier,entrywaypointorexitwaypointnotfoundinthenewdatabase.
•Airwayentry/exitwaypointisnotanacceptablewaypointfortheairway–eitherthewaypointisnolongeron
the airway, or there is a new directional restriction that prevents it being used.
•Loadingthenewairwaysequencewouldexceedthecapacityoftheightplan.
FLIGHT PLAN CREATION
There are three methods to create or modify a flight plan:
•ActiveFlightPlanPageontheMFD(create/modifytheactiveightplan)
•ActiveFlightPlanWindowonthePFD(create/modifytheactiveightplan)
•FlightPlanCatalogPageontheMFD(create/modifyastoredightplan)
Figure 5-56 Active Flight Plan Page
Active FPL Waypoint List
- Comment
- Procedure Header
- Waypoint Identifier
- Airway Identifier
- Desired Track to Waypoint
- Distance to Waypoint
- Waypoint Altitude Constraint
Vertical Navigation Profile
- Active Vertical WPT Alt/ID
- Vertical Speed Target
- Flight Path Angle
- Vertical Speed Target
- Time to Top of Descent
- Vertical Deviation
Active Flight
Plan Leg
Turn Anticipation
Arc
Non-Active,
Flight Plan Leg