Pilot's Guide

Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
190-01255-01 Rev. A94
ENGINE INDICATION & CREW ALERTING SYSTEM
Performing a pre-flight planning hover performance power check (in ground effect):
1) Press the ENGINE Softkey or turn the large FMS Knob to display the EIS-Engine Page.
2) Press the HOV PWR Softkey.
3) Press the IGE (in ground effect) Softkey.
4) Press the HOV-P Softkey.
5) Press the FMS Knob momentarily to activate the flashing cursor on the first hover performance parameter.
6) Turn the large FMS Knob to highlight the desired parameter.
7) Turn the small FMS Knob to change the value.
8) Press the HOV PWR Softkey a second time to disable the hover performance power check.
HOV PRED (Hover
Prediction Mode)
Annunciation
HOV-P (Hover Prediction
Mode) Softkey
Figure 3-14 Hover Prediction Mode (In Ground Effect)
Hover Power
Indicator (HPI)
Hover
Performance
Parameters
IGE (In Ground Effect)
Softkey
HOV PWR (Hover
Performance Power
Check) Softkey
3.4 CREW ALERTING SYSTEM (CAS)
NOTE: Aural alerts associated with abnormal conditions and advisories are managed through the audio
panels. Refer to the Audio Panel and CNS Section for more information.
When Crew Alerting System (CAS) messages are generated, a CAS window containing messages appears to
the right of the vertical speed indicator on the PFD. Up to 12 messages can be displayed; when more than
12 messages accumulate, the CAS Softkey becomes available. Pressing the CAS Softkey displays softkeys for
scrolling up and down through the messages in the PFD CAS Window.