Pilot's Guide

190-01255-01 Rev. A
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
93
ENGINE INDICATION & CREW ALERTING SYSTEM
Performing a pre-flight planning hover performance power check (out of ground effect):
1) Press the ENGINE Softkey or turn the large FMS Knob to display the EIS-Engine Page.
2) Press the HOV PWR Softkey. The OGE (out of ground effect) Softkey is automatically selected by default.
3) Press the HOV-P Softkey.
4) Press the FMS Knob momentarily to activate the flashing cursor on the first hover performance parameter.
5) Turn the large FMS Knob to highlight the desired parameter.
6) Turn the small FMS Knob to change the value.
7) Press the HOV PWR Softkey a second time to disable the hover performance power check.
HOV PRED (Hover
Prediction Mode)
Annunciation
HOV-P (Hover Prediction
Mode) Softkey
Figure 3-13 Hover Prediction Mode (Out of Ground Effect)
Hover Power
Indicator (HPI)
Hover
Performance
Parameters
OGE (Out of Ground
Effect) Softkey
HOV PWR (Hover
Performance Power
Check) Softkey