Pilot's Guide

190-01255-01 Rev. A
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
549
APPENDIX A
FLIGHT PLAN IMPORT/EXPORT MESSAGES
In some circumstances, some messages may appear in conjunction with others.
Flight Plan Import/Export Results Description
‘Flight plan successfully imported.’ A flight plan file stored on the SD card was successfully imported as a stored flight plan.
‘File contained user waypoints only. User waypoints
imported successfully. No stored flight plan data
was modified.’
The file stored on the SD card did not contain a flight plan, only user waypoints. These waypoints
have been saved to the system user waypoints. No flight plans stored in the system have been
modified.
‘No flight plan files found to import.’ The SD card contains no flight plan data.
‘Flight plan import failed.’ Flight plan data was not successfully imported from the SD card.
‘Flight plan partially imported.’ Some flight plan waypoints were successfully imported from the SD card, however others had errors
and were not imported. A partial stored flight plan now exists in the system.
‘File contained user waypoints only.’ The file stored on the SD card did not contain a flight plan, only user waypoints. One or more of
these waypoints did not import successfully.
‘Too many points. Flight plan truncated.’ The flight plan on the SD card contains more waypoints than the system can support. The flight plan
was imported with as many waypoints as possible.
‘Some waypoints not loaded. Waypoints locked.’ The flight plan on the SD card contains one or more waypoints that the system cannot find in the
navigation database. The flight plan has been imported, but must be edited within the system
before it can be activated for use.
‘User waypoint database full. Not all loaded.’ The flight plan file on the SD card contains user waypoints. The quantity of stored user waypoints
has exceeded system capacity, therefore not all the user waypoints on the SD card have been
imported. Any flight plan user waypoints that were not imported are locked in the flight plan. The
flight plan must be edited within the system before it can be activated for use.
‘One or more user waypoints renamed.’ One or more imported user waypoints were renamed when imported due to naming conflicts with
waypoints already existing in the system.
‘Flight plan successfully exported.’ The stored flight plan was successfully exported to the SD card.
‘Flight plan export failed.’ The stored flight plan was not successfully exported to the SD card. The SD card may not have
sufficient available memory or the card may have been removed prematurely.