Pilot's Guide

Garmin G1000H
™
Pilot’s Guide for the Bell 407GX 190-01255-01 Rev. A 519
ADDITIONAL FEATURES
Setting a preset channel number:
1) On the XM Radio Page, while listening to an Active Channel that is wanted for a preset, press the PRESETS
Softkey to access the first five preset channels (PS1 - PS5).
2) Press the MORE Softkey to access the next five channels (PS6 – PS10), and again to access the last five
channels (PS11 – PS15). Pressing the MORE Softkey repeatedly cycles through the preset channels.
3) Press the SET Softkey.
4) Press any one of the (PS1 - PS15) softkeys to assign a number to the active channel.
Figure 8-133 Accessing and Selecting XM Preset Channels
Select PRESETS to
Access the Preset
Channels Softkeys
Select MORE to Cycle
Through the Preset
Channels
Select SET
to Save Each
Preset Channel
PressingtheBACKSoftkey,orwaitingduring45secondsofsoftkeyinactivity,returnsthesystemtothetop
levelsoftkeys.
VOLUME
Radiovolumeisshownasapercentage.VolumeleveliscontrolledbypressingtheVOLSoftkey,which
bringsuptheMUTESoftkeyandthevolumeincreaseanddecreasesoftkeys.
Adjusting the volume:
1) With the XM Radio Page displayed, press the VOL Softkey.
2) Press the VOL – Softkey to reduce volume or press the VOL + Softkey to increase volume. (Once the VOL
Softkey is pressed, the volume can also be adjusted using the small FMS Knob.)
Figure 8-134 Volume Control
Radiovolumemayalsobeadjustedateachpassengerstation.
Mute SiriusXM audio:
1) Select the XM Radio Page or XM Information Page.
2) Press the MUTE Softkey to mute the audio. Press the MUTE Softkey again to unmute the audio.