Pilot's Guide

Garmin G1000H
™
Pilot’s Guide for the Bell 407GX 190-01255-01 Rev. A 415
ADDITIONAL FEATURES
Figure 8-1 Synthetic Vision Imagery
SVT OPERATION
SVTisactivatedfromthePFDusingthesoftkeyslocatedalongthebottomedgeofthedisplay.Pressingthe
softkeysturnstherelatedfunctiononoroff.WhenSVTisenabled,thepitchscaleincrementsarereducedto
10degreesupand7.5degreesdown.
SVT functions are displayed on three levels of softkeys.  The PFD Softkey leads into the PFD function
Softkeys,includingsynthetic vision. Pressingthe SYN VIS Softkeydisplays theSVT featuresoftkeys. The
softkeysarelabeledPATHWAY, SYN TERR, HRZN HDG , and APTSIGNS.TheBACK Softkeyreturnsto
thepreviouslevelofsoftkeys.SyntheticTerrainmustbeactivebeforeanyotherSVTfeaturemaybeactivated.
HRZN HDG , APTSIGNS, and PATHWAY Softkeys are only available when the SYN TERR Softkey is
activated(graywithblackcharacters).AfteractivatingtheSYN TERRSoftkey,theHRZN HDG , APTSIGNS,
and PATHWAYsoftkeysmaybeactivatedinanycombinationtodisplaydesiredfeatures.Whensystempower
is cycled, the last selected state (on or off) of the SYN TERR, HRZN HDG , APTSIGNS, and PATHWAY
softkeysisrememberedbythesystem.
•PATHWAYSoftkeyenablesdisplayofrectangularboxesthatrepresentcourseguidance.
•SYN TERRSoftkeyenablessyntheticterraindepiction.
•HRZN HDG Softkeyenableshorizonheadingmarksanddigits.
•APTSIGNSSoftkeyenablesairportsignposts.