Pilot's Guide

Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
190-01255-01 Rev. A406
HAZARD AVOIDANCE
Displaying traffic on the Navigation Map
1) Ensure the TAS system is operating. With the Navigation Map displayed, select the MAP Softkey.
2) Select the TRAFFIC Softkey. Traffic is now displayed on the map as shown in the figure.
Non-Threat
Traffic
Traffic
Advisory
TA Off Scale Banner
Annunciation
“No Bearing”
Traffic Advisory
Banner Annunciation
Non-Threat
Traffic with
ADS-B
Directional
Information
Proximity
Traffic with
ADS-B Directional
Information
Figure 6-122 TAS Traffic on Navigation Map
Traffic Status
Icon
Customizing the traffic display on the Navigation Map Page:
1) Select the Navigation Map Page.
2) Press the MENU Key.
3) With Map Setup highlighted, press the ENT Key (Figure 6-123).
4) Turn the small FMS Knob to select the Traffic Group and press the ENT Key (Figure 6-124).
5) Turn the large FMS Knob or press the ENT Key to scroll through the selections (Figure 6-125).
 •TRAFFIC – Turns the display of traffic data on or off
 •TRAFFIC MODE – Selects the traffic mode for display; select from:
- All Traffic - Displays all traffic
- TA/PA - Displays Traffic Advisories and Proximity Advisories
- TA ONLY - Displays Traffic Advisories only
 •TRAFFIC SMBL – Selects the maximum range at which traffic symbols are shown
 •TRAFFIC LBL – Selects the maximum range at which traffic labels are shown with the option to turn off
6) Turn the small FMS Knob to scroll through options (ON/OFF, range settings, etc.).
7) Press the ENT Key to select an option.
8) Press the FMS Knob or CLR Key to return to the Navigation Map Page.