Pilot's Guide

190-01255-01 Rev. A
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
385
HAZARD AVOIDANCE
Altitude Scale
Profile View
Path Enabled
Terrain Legend
Profile View Length
is One Half of the
Navigation Map
Range
Figure 6-104 Profile View on Navigation Map with Terrain Display Enabled
Distance Scale
Navigation Map Range
TheProleViewisbasedonthecurrentaircrafttrack(orheadingiftrackisunavailable)andshowsthehighest
knownterrainorobstacleswithinapredeterminedwidthfromthepresentaircraftpositiontotheendofthe
prolerange.ThewidthoftheProleView(Table6-15)isdeterminedbythephaseofight,asannunciated
ontheHSI.RefertotheFlightInstrumentssectionformoreinformationaboutightphases.
Flight Phase Total Profile View Width
Approach 0.6 nm
Departure 0.6 nm
Terminal 2.0 nm
Enroute 4.0 nm
Oceanic 4.0 nm
Table 6-15 Profile View Width Scale
PROFILE PATH
The ProlePath displaysthehorizontalandlateral boundariesof theProle View. Thepathisshown
asawhiterectangleontheNavigationMapPage(Figure6-104)andisonlyavailablewhenProleViewis
enabled.WhiterangemarkersbothedgesoftheProlePathrectanglematchtherangemarkersalongthe
distancescaleinsidetheProleViewdisplaywindowwhenevertheprolerangeisatleast4nm(or7.5km
ifconguredformetricunits).