Pilot's Guide

Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
190-01255-01 Rev. A350
HAZARD AVOIDANCE
Cancelling a Connext Data Request in Progress:
1) Select the Weather Data Link (CNXT) Page.
2) Press the MENU Key.
3) With ‘Connext Data Request’ highlighted, press the ENT Key.
4) Turn the large FMS Knob to select ‘CANCEL REQ’ and press the ENT Key. The request status box indicates
‘Request Cancelled’.
5) Press the FMS Knob to return to the Weather Data Link (CNXT) Page.
Theight crewcan scheduleConnext DataRequests torecurautomatically.Automatic requestsremain
enabled until the ight crew them, or the system power is cycled.  The REQUEST STATUS Window will
indicateacountdowntimeruntilthenextautomaticdatarequestoccurs.
NOTE: If automatic Connext Data Requests were enabled prior to the system entering Reversionary Mode,
the automatic weather data requests will continue in Reversionary Mode, however the Connext Data
Request Window and its associated options will not be available in Reversionary Mode.
Enabling/disabling automatic Connext Data Requests:
1) Select the Weather Data Link (CNXT) Page.
2) Press the MENU Key.
3) With ‘Connext Weather Request’ highlighted, press the ENT Key.
4) Choose the desired weather coverage options.
5) Turn the large FMS Knob to select the ‘UPDATE RATE’ setting. Then turn the small FMS Knob to highlight the
desired automatic update frequency (OFF, 5 Min, 10 Min, 15 Min, 20 Min, 30 Min, 45 Min, or 60 Min), then
press the ENT Key.
6) The ‘SEND REQ” button is highlighted and a countdown timer is displayed in the ‘REQUEST STATUS’ based
on the currently selected update rate. Press the ENT Key to immediately send an immediate Connext Data
Request.
Or:
Press the FMS Knob to return to the Weather Data Link (CNXT) Page.