Pilot's Guide

190-01255-01 Rev. A
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
405
HAZARD AVOIDANCE
Figure 6-121 Traffic Map Page Menu
tRaFFic maP Page DisPlay Range
ThedisplayrangeontheTrafcMapPagecanbechangedatanytime.Maprangeisadjustablewiththe
RANGE Knobfrom2to12nm,asindicatedbythemaprangerings.
Changing the display range on the Traffic Map Page:
1) Turn the RANGE Knob.
2) The following range options are available:
 • 2 nm
 • 2 and 6 nm
 • 6 and 12 nm
ADDITIONAL TRAFFIC DISPLAYS
TrafcinformationcanbedisplayedonthefollowingmapsontheMFDwhentheunitisoperating:
•NavigationMapPage
•TrafcMapPage
•TripPlanningPage
•NearestPages
•ActiveFlightPlanPage
TrafcinformationcanalsobedisplayedonthePFDwhenSyntheticVisionTechnology(SVT)systemis
enabled.SeetheAdditionalFeaturesSectionfordetails.
Displaying traffic information (MFD maps other than the Traffic Map Page):
1) Select the MAP Softkey.
2) Select the TRAFFIC Softkey. Traffic is now displayed on the map.
WhentrafcisselectedonmapsotherthantheTrafcMapPage,atrafciconisshowntoindicatetrafc
isenabledfordisplay(Figure6-122).