Pilot's Guide

190-01255-01 Rev. A Garmin G1000H
™
Pilot’s Guide for the Bell 407GX 122
AUDIO PANEL AND CNS
ADF/DME TUNING (OPTIONAL)
NOTE: When another auxiliary window is turned on, the ADF/DME Tuning Window is replaced on the PFD.
SeetheFlight InstrumentsSectionfor displaying theDMEand bearinginformationwindows (ADF)and
usingtheADFasthesourceforthebearingpointer.
ThesystemtunestheoptionalADFreceiverandDMEtransceiver.TheADFistunedbyenteringthefrequency
intheADFstandbyfrequencyeldoftheADF/DMETuningWindow.(ThesoftkeymaybelabeledADF/DME
or DME, depending on installed equipment.)
TheUHFDMEfrequencyistunedbypairingwithaVHFNAVfrequency.DMEfrequencypairingisautomatic
andonlytheVHFNAVfrequencyisshown.
ThefollowingADF/DMEinformationisdisplayedintheADF/DMETuningWindow:
•Active and standbyADFfrequencies
•ADFreceivermode
•DMEtuningmode(DMEtransceiverpairing)
When the ADF/DME Tuning Window is displayed, the selection cursor is placed over the standby ADF
frequency field.
Turning the large FMS Knobmovestheselectioncursorthroughthevariouselds(standbyADFfrequency,
ADFreceivermode,andDMEtuningmode).Pressingthe FMS Knob activates/deactivates the selection cursor
intheADF/DMETuningWindow.TheADFfrequencyisenteredusingtheFMS Knob and the ENT Key.
Figure 4-29 ADF/DME Tuning Window
Active ADF Frequency Standby ADF Frequency
ADF
Mode
DME
Tuning
Mode