Cockpit Reference Guide

Garmin G1000
®
Cockpit Reference Guide for the Cessna CitationJet Model 525
190-01130-00 Rev. A
12
Nav/Com/XPDR/Audio Panel
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
SELECT TRANSPONDER MODE
1) Press the XPDR Softkey.
2) If the aircraft is equipped with two transponders, press the XPDR1 or
XPDR2 Softkey to select the active transponder.
3) Press the desired transponder mode softkey (STBY, ON, ALT, or GND).
SELECTING A COM RADIO
Transmit/Receive
Press the COM1 MIC , COM2 MIC , or COM3 MIC Key (HF, if installed) on
the audio panel.
Receive Only
Press the COM1, COM2 , or COM3 Key (HF, if installed) on the audio panel.
SELECTING A NAV RADIO
1) To begin navigating using a navigation radio, press the CDI Softkey on the
PFD to select VOR1/LOC1 (NAV1) or VOR2/LOC2 (NAV2).
2) Press the NAV1 , NAV2 , DME , or ADF Key on the audio panel to select or
deselect the navigation radio audio source. All radio keys can be selected
individually or together.
NAV/COM TUNING
1) Turn the respective tuning knobs to enter the desired frequency into the
standby frequency field. The large knob enters MHz and the small knob
enters kHz.
2) Press the appropriate Frequency Transfer Key to place the frequency into
the active frequency field.
Or :
1) Press the COM or NAV Key on the MFD/PFD Control Unit to select the
desired COM or NAV frequency box.
2) Turn the FMS Knob to tune the desired frequency (large knob for MHz;
small knob for kHz).
3) Press the Frequency Transfer Key to transfer the frequency to the active field.