Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the DA42-L360
190-01062-01 Rev. A
9
Nav/Com/XPDR/Audio Panel
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
NAV/COM/TRANSPONDER/AUDIO PANEL
ENTER OR CHANGE FLIGHT ID
1) Press the TMR/REF Softkey, then turn the large FMS Knob to highlight the
Flight ID field.
2) Turn the small FMS Knob to enter the first character.
3) Turn the large FMS Knob to select the next field.
4) Turn the small FMS Knob to enter the next desired character.
5) Repeat steps 3 and 4 until the desired Flight ID is entered.
6) Press the ENT Key to update the Flight ID.
ENTER A TRANSPONDER CODE
1) Press the XPDR Softkey to display the transponder mode selection softkeys.
2) Press the CODE Softkey to display the transponder code selection softkeys,
for digit entry.
3) Press the digit softkeys to enter the code in the code field. When entering
the code, the next key in sequence must be pressed within 10 seconds, or
the entry is cancelled and restored to the previous code. Five seconds after
the fourth digit has been entered, the transponder code becomes active.
ADF TUNING (OPTIONAL)
1) Press the ADF/DME Softkey.
2) Turn the small FMS Knob to enter the first digit of the desired ADF
frequency.
3) Turn the large FMS Knob to select the next desired field.
4) Turn the small FMS Knob to enter the desired number.
5) Repeat steps 3 and 4 until the desired ADF frequency is entered.
6) Press the ENT Key to accept the new frequency.
7) Press the ENT Key again to transfer the frequency to the active field.
8) Turn the large FMS Knob to select the MODE field.
9) Turn the small FMS Knob to select ANT, ADF, ADF/BFO, or ANT/BFO.
10) Press the ENT Key to complete the selection.