Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-00929-02 Rev. A
50
Hazard Avoidance
Flight
Instruments
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
FeaturesAnnun/AlertsAppendixIndex
TRAFFIC AVOIDANCE SYSTEMS
• IfTrafcinformationService(TIS)iscongured,aSTANDBY, OPERATE, and
TNA MUTE Softkey will be displayed.
• IfaTrafcAdvisorySystem(TAS)iscongured,aSTANDBY, OPERATE or
NORMAL, TEST, and ALT MODE Softkey will be displayed.
Traffic Symbol Description
Non-Threat Traffic
(intruder is beyond 5 nm and greater than 1200’ vertical separation)
Proximity Advisory (PA)(TAS only, not available with TIS)
(intruder is within 5 nm and less than 1200’ vertical separation)
Traffic Advisory (TA)
(closing rate, distance, and vertical separation meet TA criteria)
Traffic Advisory Off Scale
Traffic Symbol Description
Traffic Information Service (TIS)
NOTE: If the G1000 is configured to use an optional Traffic Advisory System
(TAS), TIS is not available for use.
NOTE: Traffic Information Service (TIS) is only available when the aircraft is
within the service volume of a TIS capable terminal radar site.
Displaying Traffic on the Traffic Map Page
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Traffic Map Page.
3) Select the OPERATE Softkey to begin displaying traffic. ‘OPERATING’ is
displayed in the Traffic Mode field.
4) Select the STANDBY Softkey to place the system in the Standby Mode.
‘STANDBY’ will be displayed in the Traffic Mode field.
5) Rotate the Joystick clockwise to display a larger area or rotate counter-
clockwise to display a smaller area.
6) Select the TNA MUTE Softkey to mute the “Traffic Not Available” aural alert.