Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Diamond DA40NG
190-00953-02 Rev. A 31
Flight Planning
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
6) Turn the FMS Knob to select the desired airway exit point from the list, and
press the ENT Key. ‘LOAD?’ is highlighted.
7) Press the ENT Key. The system returns to editing the flight plan with the
new airway inserted.
INVERT AN ACTIVE FLIGHT PLAN
1) Press the FPL Key to display the active flight plan.
2) Press the MENU Key to display the Page Menu.
3) Turn the large FMS Knob to highlight ‘Invert Flight Plan’.
4) Press the ENT Key. The original flight plan remains intact in its flight plan
catalog storage location.
5) With ‘OK’ highlighted, press the ENT Key to invert the flight plan.
REMOVE A DEPARTURE, ARRIVAL, APPROACH, OR AIRWAY FROM A FLIGHT
PLAN
1) Press the FPL Key to display the active flight plan. Press the FMS Knob to
activate the cursor.
Or, for a stored flight plan:
a) Press the FPL Key on the MFD and turn the small FMS Knob to select
the Flight Plan Catalog Page.
b) Press the FMS Knob to activate the cursor.
c) Turn the large FMS Knob to highlight the desired flight plan.
d) Press the EDIT Softkey.
2) Turn the large FMS Knob to highlight the title for the approach, departure,
arrival, or airway to be deleted. Titles appear in white directly above the
procedure’s waypoints.
3) Press the CLR Key to display a confirmation window.
4) With ‘OK’ highlighted, press the ENT Key to remove the selected procedure
or airway.