Cockpit Reference Guide
Garmin G1000 Cockpit Reference Guide for the DA40NG
190-00953-00 Rev. A
48
Additional Features
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
Assigning Channel Presets
Up to 15 channels from any category can be assigned a preset number.
1)
On the XM Radio Page, with the desired channel active, press the PRESETS
Softkey to access the first five preset channels (PS1 - PS5).
2)
Press the MORE Softkey to access the next five channels (PS6 – PS10),
and again to access the last five channels (PS11 – PS15). Pressing the
MORE Softkey repeatedly cycles through the preset channels.
3)
Press any one of the (PS1 - PS15) softkeys to assign a number to the
active channel.
4)
Press the SET Softkey on the desired channel number to save the channel
as a preset.
Adjusting Volume
1)
On the XM Radio Page, press the RADIO Softkey.
2)
Press the VOL Softkey to access the volume control softkeys.
3)
Press VOL + or VOL - softkeys to adjust the volume level.
4)
Press the MUTE Softkey to mute the radio audio.
ELECTRONIC CHECKLISTS (OPTIONAL)
The system accesses the checklists from an SD card inserted into the card slot.
IftheSDcardcontainsan invalidchecklist leor nochecklist,the Power-up Page
messages display ‘Checklist File: Invalid’ or ‘Checklist File: N/A’ (not available) and the
CHKLIST Softkey is not available.
Accessing and Navigating Checklists
1)
From any page on the MFD, select the CHKLIST Softkey or turn the large
FMS Knob to select the Checklist Page.
2)
Turn the large FMS Knob to select the ‘GROUP’ field.
3)
Turn the small FMS Knob to select the desired procedure and press the
ENT Key.
4)
Turn the large FMS Knob to select the ‘CHECKLIST’ field.
5)
Turn the small FMS Knob to select the desired checklist and press the ENT
Key. The selected checklist item is indicated with white text surrounded by
a white box.