Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Caravan
190-00748-02 Rev. D
Appendix
100
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
• ExistingSupplementalDatabaseSDCard(010-00330-41,-42,or-43)fromthe
MFD.ThesupplementaldatacardfromtheMFDshouldbeusedbecauseall
databases(excepttheactivenavigationdatabase)arerequiredtoresideonthis
card.
Jeppesen Databases
NOTE: The Jeppesen aviation navigation database is now referred to as the
‘navigation database’. Previously this database had been referred to as the
‘aviation database’.
TheChartViewdatabaseshouldbecopiedtotheSupplementalDataCardwhich
willresideinthebottomcardslotontheMFD.Thenavigationdatabaseisbeloaded
fromtheJeppesenorusersuppliedSDdatacard.ContactJeppesen(www.jeppesen.
com)forsubscriptionandupdateinformation.
ThenavigationdatabaseisloadedfromanSDcardinsertedintothetopcardslot
ofeachdisplayed.ThedatabaseiscopiedfromtheSDcardinthetopcardslottothe
display’sinternalmemory.
Loading Updated Databases
InsomecasesitmaybenecessarytoobtainanunlockcodefromGarmininorder
tomakethedatabaseproductfunctional.Itmayalsobenecessarytohavethesystem
congured by a Garmin authorized service facility in order to use some database
features.
Loading the Garmin database updates:
1) With G1000 system power OFF, remove the SD card from the bottom card
slot of each display.
2) Using a personal computer, update the Garmin databases on each SD card.
FliteCharts or ChartView databases are copied to the MFD SD card.
3) After all database cards are updated, insert each database SD card into the
bottom card slot of the appropriate display.
4) Apply power to the G1000 system, check that the databases are initialized
and displayed on the power-up screen.