Cockpit Reference Guide

Cirrus Perspective
™
by Garmin – Cockpit Reference Guide for the SR22
190-00821-00 Rev. C
31
Flight Planning
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
5) Repeat step 3 and 4 to spell out the rest of the waypoint identifier.
6) Press the ENT Key and the cursor is now ready for entering of the next flight
plan waypoint.
7) Repeat steps 3 through 6 to enter the identifier for each additional flight plan
waypoint.
8) Once all waypoints have been entered, press the FMS Knob to remove the
cursor. The new flight plan is now active.
INSERT A WAYPOINT IN THE ACTIVE FLIGHT PLAN
1) Press the FPL Key on the Control Unit to display the active flight plan.
2) If necessary, press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the desired flight plan waypoint. The
new waypoint is inserted before the highlighted waypoint.
4) Turn the small FMS Knob. The Waypoint Information Window is now
displayed.
5) Enter the new flight plan waypoint by one of the following:
a) Enter the user waypoint identifier, facility, or city.
b) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the ‘NRST’ airport
waypoints to the aircraft’s current position.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the ‘RECENT’
waypoints.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
e) Press the ENT Key again to “accept” the waypoint.