Cockpit Reference Guide
Cockpit Reference Guide for the Prodigy
®
Flight Deck 100
190-00685-06 Rev. A
166
Annunciations & Alerts
Flight
InstrumentsEAS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
Message Comments
SLCT NAV
– Select NAV on CDI for
approach.
The system notifies the pilot to set the CDI to
the correct NAV receiver. Set the CDI to the
correct NAV receiver.
PTK FAIL
– Parallel track
unavailable: bad geometry.
Bad parallel track geometry.
PTK FAIL
– Parallel track
unavailable: invalid leg type.
Invalid leg type for parallel offset.
PTK FAIL
– Parallel track
unavailable: past IAF.
IAF waypoint for parallel offset has been
passed.
UNABLE V WPT
– Can’t reach
current vertical waypoint.
The current vertical waypoint can not be reached
within the maximum flight path angle and vertical
speed constraints. The system automatically
transitions to the next vertical waypoint.
VNV
– Unavailable. Unsupported
leg type in flight plan.
The lateral flight plan contains a procedure turn,
vector, or other unsupported leg type prior to the
active vertical waypoint. This prevents vertical
guidance to the active vertical waypoint.
VNV
– Unavailable. Excessive track
angle error.
The current track angle error exceeds the limit,
causing the vertical deviation to go invalid.
VNV
– Unavailable. Excessive
crosstrack error.
The current crosstrack exceeds the limit, causing
vertical deviation to go invalid.
VNV
– Unavailable. Parallel course
selected.
A parallel course has been selected, causing the
vertical deviation to go invalid.
BARO MISMATCH
– Correct baro
mismatch for VNAV guidance.
Altimeter setting is not the same on PFD1 and
PFD2. Synchronize settings for VNAV guidance.
NON WGS84 WPT
– Do not use
GPS navigation to [xxxx].
The position of the selected waypoint [xxxx]
is not calculated based on the WGS84 map
reference datum and may be positioned in error
as displayed. Do not use GPS to navigate to
the selected non-WGS84 waypoint.
TRAFFIC FAIL
– Traffic device has
failed.
The system is no longer receiving data from
the traffic system. The traffic device should be
serviced.