Cockpit Reference Guide
Table Of Contents
- Flight Instruments
- Selecting the Altimeter Barometric Pressure Setting
- Selecting Standard Barometric Pressure
- Change Altimeter Barometric Pressure Setting Units
- Synchronizing the Altimeter Barometric Pressure Settings
- Synchronize CDI
- Change Navigation Sources
- Enable/Disable OBS Mode While Navigating with GPS
- Generic Timer
- Configure Vspeed Bugs Individually
- Turn Vspeed Bugs On or Off by Category
- Set Minimum Descent Altitude/Decision Height
- Displaying Wind Data
- Engine & Airframe Systems
- Nav/Com/Transponder/Audio Panel
- Automatic Flight Control System
- GPS Navigation
- Flight Planning
- Weight Planning
- Trip Planning
- Create a User Waypoint Defined by Latitude & Longitude
- Create a User Waypoint Defined by Radials from Other Waypoints
- Create a User Waypoint Defined by a Radial & Distance from Another Waypoint
- Delete a User Waypoint
- Create a Flight Plan
- Import a Flight Plan from an SD Card
- Insert a Waypoint in the Active Flight Plan
- Enter an Airway in a Flight Plan
- Creating a User-Defined Hold at an Active Flight Plan Waypoint
- Creating a User-Defined Hold at the Aircraft Present Position
- Removing a User-Defined Hold (Created at the Aircraft P.POS)
- Removing a User-Defined Hold (Created at an Active Waypoint)
- Invert An Active Flight Plan
- Remove a Departure, Arrival, Approach, or Airway from a Flight Plan
- Store a Flight Plan
- Edit a Stored Flight Plan
- Delete a Waypoint from the Flight Plan
- Invert and Activate a Stored Flight Plan
- Copy a Flight Plan
- Delete a Flight Plan
- Graphical Flight Plan Creation
- Export a Flight Plan to an SD Card
- Procedures
- Load and Activate a Departure Procedure
- Activate A Departure Leg
- Load An Arrival Procedure
- Activate An Arrival Leg
- Load and/or Activate an Approach Procedure
- Activate An Approach in the Active Flight Plan
- Activate a Vector to Final Approach Fix
- Activate A Missed Approach in the Active Flight Plan
- Temperature Compensated Altitude
- Hazard Avoidance
- Customizing the Hazard Displays on the Navigation Map
- SiriusXM Weather (Subscription Optional)
- Connext Weather (Optional)
- Traffic Information Service (TIS)
- Traffic Collision Avoidance System (TCAS II) (Optional)
- Terrain Awareness & Warning System
- Profile View Terrain and Obstacles (Optional)
- Airborne Color Weather Radar
- Additional Features
- Abnormal Operation
- Annunciations & Alerts
- CAS Messages
- Comparator Annunciations
- Reversionary Sensor Annunciations
- TAWS-A Alerts
- TAWS-B Alerts
- TCAS II Alerts and Annunciations
- CPDLC ATC Alert
- Other Prodigy® Aural Alerts
- Flight Plan Import/Export Messages
- Pilot Profile Import/Export Messages
- MFD & PFD Message Advisories
- Database Message Advisories
- GMA 1347D Message Advisories
- GIA 63W Message Advisories
- GSD 41 Message Advisories
- GEA 71 Message Advisories
- GTX 33 Message Advisories
- GRS 77 Message Advisories
- GMU 44 Message Advisories
- GSR 56 Message Advisories
- GDL 59 Message Advisories
- GDL 69A Message Advisories
- GDR 66 Message Advisories
- GWX 68 Alert Messages
- GCU 477 Message Advisories
- GMC 715 Message Advisories
- Miscellaneous Message Advisories
- Other System Annunciations
- Appendix
- Index

Cockpit Reference Guide for the Prodigy
®
Flight Deck 300
190-00761-04 Rev. A 81
Hazard Avoidance
Flight
Instruments EAS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
TAWS Inhibit (TAWS-B Only)
NOTE: If TAWS alerts are inhibited when the Final Approach Fix is the active
waypoint in a GPS SBAS approach, a LOW ALT annunciation may appear on
the PFD next to the altimeter if the current aircraft altitude is at least 164
feet below the prescribed altitude at the Final Approach Fix.
Disable TAWS
While the TAWS-B Page is displayed, select the INHIBIT Softkey.
Or
:
1)
Press the MENU Key.
2)
Turn the small FMS Knob to select ‘Inhibit TAWS’.
3)
Press the ENT Key.
Enable TAWS
While the TAWS-B Page is displayed, select the INHIBIT Softkey.
Or
:
1)
While the TAWS-B Page is displayed, press the MENU Key.
2)
Turn the small FMS Knob to select ‘Enable TAWS’.
3)
Press the ENT Key.
Displaying Terrain and Obstacles on the Navigation Map
1)
With the Navigation Map displayed, press the MAP Softkey.
2)
Select the TERRAIN Softkey. Terrain and obstacles will now be displayed
on the map.
PROFILE VIEW TERRAIN AND OBSTACLES (OPTIONAL)
The system offers a Profile View of terrain and obstacles relative to the aircraft’s
current flight path and altitude on the Navigation Map Page of the MFD. Profile View
does not provide terrain or obstacle caution or warning annunciations or voice alerts,
nor does it display potential impact points inside the Profile View.
Enabling/Disabling Profile View
While viewing the Navigation Map Page,
select
the PROFILE Softkey.










