Cockpit Reference Guide
Table Of Contents
- Flight Instruments
- Selecting the Altimeter Barometric Pressure Setting
- Selecting Standard Barometric Pressure
- Change Altimeter Barometric Pressure Setting Units
- Synchronizing the Altimeter Barometric Pressure Settings
- Synchronize CDI
- Change Navigation Sources
- Enable/Disable OBS Mode While Navigating with GPS
- Generic Timer
- Configure Vspeed Bugs Individually
- Turn Vspeed Bugs On or Off by Category
- Set Minimum Descent Altitude/Decision Height
- Displaying Wind Data
- Engine & Airframe Systems
- Nav/Com/Transponder/Audio Panel
- Automatic Flight Control System
- GPS Navigation
- Flight Planning
- Weight Planning
- Trip Planning
- Create a User Waypoint Defined by Latitude & Longitude
- Create a User Waypoint Defined by Radials from Other Waypoints
- Create a User Waypoint Defined by a Radial & Distance from Another Waypoint
- Delete a User Waypoint
- Create a Flight Plan
- Import a Flight Plan from an SD Card
- Insert a Waypoint in the Active Flight Plan
- Enter an Airway in a Flight Plan
- Creating a User-Defined Hold at an Active Flight Plan Waypoint
- Creating a User-Defined Hold at the Aircraft Present Position
- Removing a User-Defined Hold (Created at the Aircraft P.POS)
- Removing a User-Defined Hold (Created at an Active Waypoint)
- Invert An Active Flight Plan
- Remove a Departure, Arrival, Approach, or Airway from a Flight Plan
- Store a Flight Plan
- Edit a Stored Flight Plan
- Delete a Waypoint from the Flight Plan
- Invert and Activate a Stored Flight Plan
- Copy a Flight Plan
- Delete a Flight Plan
- Graphical Flight Plan Creation
- Export a Flight Plan to an SD Card
- Procedures
- Load and Activate a Departure Procedure
- Activate A Departure Leg
- Load An Arrival Procedure
- Activate An Arrival Leg
- Load and/or Activate an Approach Procedure
- Activate An Approach in the Active Flight Plan
- Activate a Vector to Final Approach Fix
- Activate A Missed Approach in the Active Flight Plan
- Temperature Compensated Altitude
- Hazard Avoidance
- Customizing the Hazard Displays on the Navigation Map
- SiriusXM Weather (Subscription Optional)
- Connext Weather (Optional)
- Traffic Information Service (TIS)
- Traffic Collision Avoidance System (TCAS II) (Optional)
- Terrain Awareness & Warning System
- Profile View Terrain and Obstacles (Optional)
- Airborne Color Weather Radar
- Additional Features
- Abnormal Operation
- Annunciations & Alerts
- CAS Messages
- Comparator Annunciations
- Reversionary Sensor Annunciations
- TAWS-A Alerts
- TAWS-B Alerts
- TCAS II Alerts and Annunciations
- CPDLC ATC Alert
- Other Prodigy® Aural Alerts
- Flight Plan Import/Export Messages
- Pilot Profile Import/Export Messages
- MFD & PFD Message Advisories
- Database Message Advisories
- GMA 1347D Message Advisories
- GIA 63W Message Advisories
- GSD 41 Message Advisories
- GEA 71 Message Advisories
- GTX 33 Message Advisories
- GRS 77 Message Advisories
- GMU 44 Message Advisories
- GSR 56 Message Advisories
- GDL 59 Message Advisories
- GDL 69A Message Advisories
- GDR 66 Message Advisories
- GWX 68 Alert Messages
- GCU 477 Message Advisories
- GMC 715 Message Advisories
- Miscellaneous Message Advisories
- Other System Annunciations
- Appendix
- Index

Cockpit Reference Guide for the Prodigy
®
Flight Deck 300
190-00761-04 Rev. A 3
Flight Instruments
Flight
Instruments EAS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
4)
Press the ENT Key or turn the large FMS Knob to highlight the ON/OFF
field.
5)
Turn the
small
FMS Knob clockwise to ON or counterclockwise to OFF.
6)
To remove the window, press the CLR Key or the TMR/REF Softkey.
TURN VSPEED BUGS ON OR OFF BY CATEGORY
1)
Press the TMR/REF Softkey.
2)
Press the MENU Key.
3)
Turn the FMS Knob to highlight the desired option.
4)
Press the ENT Key. Press the TMR/REF Softkey to remove the window.
SET MINIMUM DESCENT ALTITUDE/DECISION HEIGHT
1)
Press the
TMR/REF
Softkey.
2)
Turn the large FMS Knob to highlight the Minimums field.
3)
Turn the small FMS Knob to select BARO, RAD ALT (optional) or TEMP
COMP. OFF is selected by default. Press the ENT Key or turn the large
FMS Knob to highlight the next field.
4)
Use the small FMS Knob to enter the desired altitude. When BARO and
TEMP COMP are selected, values from zero to 16,000 feet may be entered.
When RAD ALT is selected, values from zero to 2,500 feet may be entered.
5)
If TEMP COMP was selected, press the ENT Key or turn the large FMS
Knob to highlight the next field and then enter the destination airport
temperature (-59˚C to 59˚C). The temperature compensated altitude
minimum is displayed below the previously enter minimum altitude value.
6)
To remove the window, press the
CLR
Key or the
TMR/REF
Softkey.
DISPLAYING WIND DATA
1)
Press the PFD Softkey.
2)
Press the WIND Softkey to display wind data below the Selected Heading.
3)
Press one of the OPTN softkeys to change how wind data is displayed.
4)
To remove the Wind Data Window, press the OFF Softkey.










