Cockpit Reference Guide

Cockpit Reference Guide for the Prodigy
®
Flight Deck 300
190-00761-04 Rev. A 109
Additional Features
Flight
Instruments EAS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
6) Press the ENT Key or select the CHECK Softkey to check the selected
checklist item. The line item turns green and a checkmark is placed in the
associated box. The next line item is automatically selected for checking.
Either FMS Knob can be used to scroll through the checklist and select the
desired checklist item.
Press the CLR Key or select the UNCHECK Softkey to remove a check mark
from an item.
7) When all checklist items have been checked, ‘*Checklist Finished*’ is
displayed in green text at the bottom left of the checklist window and
‘GO TO NEXT CHECKLIST?’ is highlighted. If ‘GO TO NEXT CHECKLIST?’
is selected prior to checking all the checklist items, ‘*CHECKLIST NOT
FINISHED*’ will be displayed in yellow text.
8) Press the ENT Key. If ‘GO TO NEXT CHECKLIST?’ is displayed when
pressing the ENT Key, the next checklist in the group will be displayed. If
‘EXIT CHECKLISTS?’ is displayed when pressing the ENT Key, the system
will exit the Checklist Page.
9) Select the EXIT Softkey to exit the Checklist Page and return to the page
last viewed. When returning to the Checklist Page after pressing the EXIT
Softkey, the system will return to the last selected checklist item.
Immediately Accessing Emergency Procedures
1) From any page on the MFD, select the CHKLIST Softkey or turn the large
FMS Knob to select the Checklist Page.
2) Select the EMERGCY Softkey.
3) Turn the FMS Knob to select the desired emergency checklist and press the
ENT Key.
4) Press the ENT Key or select the CHECK Softkey to check the selected
emergency checklist item. The line item turns green and a checkmark is
placed in the box next to it. The next line item is automatically highlighted
for checking.
Either FMS Knob can be used to scroll through the checklist and select the
desired checklist item.
Press the CLR Key or select the UNCHECK Softkey to remove a check mark
from an item.