Cockpit Reference Guide
Table Of Contents
- Flight Instruments
- Selecting the Altimeter Barometric Pressure Setting
- Selecting Standard Barometric Pressure
- Change Altimeter Barometric Pressure Setting Units
- Synchronizing the Altimeter Barometric Pressure Settings
- Synchronize CDI
- Change Navigation Sources
- Enable/Disable OBS Mode While Navigating with GPS
- Generic Timer
- Configure Vspeed Bugs Individually
- Turn Vspeed Bugs On or Off by Category
- Set Minimum Descent Altitude/Decision Height
- Displaying Wind Data
- Engine & Airframe Systems
- Nav/Com/Transponder/Audio Panel
- Automatic Flight Control System
- GPS Navigation
- Flight Planning
- Weight Planning
- Trip Planning
- Create a User Waypoint Defined by Latitude & Longitude
- Create a User Waypoint Defined by Radials from Other Waypoints
- Create a User Waypoint Defined by a Radial & Distance from Another Waypoint
- Delete a User Waypoint
- Create a Flight Plan
- Import a Flight Plan from an SD Card
- Insert a Waypoint in the Active Flight Plan
- Enter an Airway in a Flight Plan
- Creating a User-Defined Hold at an Active Flight Plan Waypoint
- Creating a User-Defined Hold at the Aircraft Present Position
- Removing a User-Defined Hold (Created at the Aircraft P.POS)
- Removing a User-Defined Hold (Created at an Active Waypoint)
- Invert An Active Flight Plan
- Remove a Departure, Arrival, Approach, or Airway from a Flight Plan
- Store a Flight Plan
- Edit a Stored Flight Plan
- Delete a Waypoint from the Flight Plan
- Invert and Activate a Stored Flight Plan
- Copy a Flight Plan
- Delete a Flight Plan
- Graphical Flight Plan Creation
- Export a Flight Plan to an SD Card
- Procedures
- Load and Activate a Departure Procedure
- Activate A Departure Leg
- Load An Arrival Procedure
- Activate An Arrival Leg
- Load and/or Activate an Approach Procedure
- Activate An Approach in the Active Flight Plan
- Activate a Vector to Final Approach Fix
- Activate A Missed Approach in the Active Flight Plan
- Temperature Compensated Altitude
- Hazard Avoidance
- Customizing the Hazard Displays on the Navigation Map
- SiriusXM Weather (Subscription Optional)
- Connext Weather (Optional)
- Traffic Information Service (TIS)
- Traffic Collision Avoidance System (TCAS II) (Optional)
- Terrain Awareness & Warning System
- Profile View Terrain and Obstacles (Optional)
- Airborne Color Weather Radar
- Additional Features
- Abnormal Operation
- Annunciations & Alerts
- CAS Messages
- Comparator Annunciations
- Reversionary Sensor Annunciations
- TAWS-A Alerts
- TAWS-B Alerts
- TCAS II Alerts and Annunciations
- CPDLC ATC Alert
- Other Prodigy® Aural Alerts
- Flight Plan Import/Export Messages
- Pilot Profile Import/Export Messages
- MFD & PFD Message Advisories
- Database Message Advisories
- GMA 1347D Message Advisories
- GIA 63W Message Advisories
- GSD 41 Message Advisories
- GEA 71 Message Advisories
- GTX 33 Message Advisories
- GRS 77 Message Advisories
- GMU 44 Message Advisories
- GSR 56 Message Advisories
- GDL 59 Message Advisories
- GDL 69A Message Advisories
- GDR 66 Message Advisories
- GWX 68 Alert Messages
- GCU 477 Message Advisories
- GMC 715 Message Advisories
- Miscellaneous Message Advisories
- Other System Annunciations
- Appendix
- Index
Cockpit Reference Guide for the Prodigy
®
Flight Deck 300
190-00761-04 Rev. A
108
Additional Features
Flight
InstrumentsEAS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
Adjusting Volume
1)
With the XM Radio Page displayed, press the VOL Softkey.
2)
Press the VOL – Softkey to reduce volume or press the VOL + Softkey to
increase volume. (Once the VOL Softkey is pressed, the volume can also be
adjusted using the small FMS Knob.)
Mute SiriusXM Audio
1)
Select the XM Radio Page or XM Information Page.
2)
Press the MUTE Softkey to mute the audio. Press the MUTE Softkey again
to unmute the audio.
ELECTRONIC CHECKLISTS (OPTIONAL)
The system accesses the checklists from an SD card inserted into the card slot.
If the SD card contains an invalid checklist file or no checklist, the Power-up Page
messages display ‘Checklist File: Invalid’ or ‘Checklist File: N/A’ (not available) and the
CHKLIST Softkey is not available.
The following colors are used for checklist items:
• Light Blue - Items not selected or
checked
• White - Item is selected
• Green - Item has been checked
• Gray - General notes
• Yellow - Caution notes
• Red - Warning notes
Accessing and Navigating Checklists
1)
From any page on the MFD, select the CHKLIST Softkey or turn the large
FMS Knob to select the Checklist Page.
2)
Turn the large FMS Knob to select the ‘GROUP’ field.
3)
Turn the small FMS Knob to select the desired procedure and press the
ENT Key.
4)
Turn the large FMS Knob to select the ‘CHECKLIST’ field.
5)
Turn the small FMS Knob to select the desired checklist and press the ENT
Key. The selected checklist item is indicated with white text surrounded by
a white box.