Cockpit Reference Guide
Table Of Contents
- Flight Instruments
- Selecting the Altimeter Barometric Pressure Setting
- Selecting Standard Barometric Pressure
- Change Altimeter Barometric Pressure Setting Units
- Synchronizing the Altimeter Barometric Pressure Settings
- Synchronize CDI
- Change Navigation Sources
- Enable/Disable OBS Mode While Navigating with GPS
- Generic Timer
- Configure Vspeed Bugs Individually
- Turn Vspeed Bugs On or Off by Category
- Set Barometric/Radar Altimeter (Optional) Minimum Descent Altitude
- Displaying Wind Data
- Engine & Airframe Systems
- Nav/Com/Transponder/Audio Panel
- Automatic Flight Control System
- GPS Navigation
- Flight Planning
- Weight Planning
- Trip Planning
- Create a New User Waypoint Defined by Latitude & Longitude
- Create a New User Waypoint Defined by Radials from Other Waypoints
- Create a New User Waypoint Defined by a Radial & Distance from Another Waypoint
- Delete a User Waypoint
- Create a New Flight Plan
- Import a Flight Plan from an SD Card
- Insert a Waypoint in the Active Flight Plan
- Enter an Airway in a Flight Plan
- Invert An Active Flight Plan
- Remove a Departure, Arrival, Approach, or Airway from a Flight Plan
- Store a Flight Plan
- Edit a Stored Flight Plan
- Delete a Waypoint from the Flight Plan
- Invert and Activate a Stored Flight Plan
- Copy a Flight Plan
- Delete a Flight Plan
- Graphical Flight Plan Creation
- Export a Flight Plan to an SD Card
- Procedures
- Hazard Avoidance
- Additional Features
- Abnormal Operation
- Annunciations & Alerts
- CAS Messages
- Comparator Annunciations
- Reversionary Sensor Annunciations
- TAWS-A Alerts
- TAWS-B Alerts
- TCAS I Alerts and Annunciations
- TCAS II Alerts and Annunciations
- Other Prodigy® Aural Alerts
- Flight Plan Import/Export Messages
- MFD & PFD Message Advisories
- Database Message Advisories
- GMA 1347D Message Advisories
- GIA 63W Message Advisories
- GSD 41 Message Advisories
- GEA 71 Message Advisories
- GTX 33/33D Message Advisories
- GRS 77 Message Advisories
- GMU 44 Message Advisories
- GSR 56 Message Advisories
- GDL 59 Message Advisories
- GDL 69A Message Advisories
- GWX 68 Alert Messages
- GDC 74B Message Advisories
- GCU 475 Message Advisories
- GMC 715 Message Advisories
- GTS 850 Message Advisories
- Miscellaneous Message Advisories
- Appendix
- Index
Cockpit Reference Guide for the Prodigy
®
Flight Deck 100
190-00685-03 Rev. A
72
Additional Features
Flight
InstrumentsEAS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
Registering the System for Data Link Services
1)
With the Prodigy
®
system connected to a Wi-Fi network, turn the large FMS
Knob on the MFD to select the AUX page group.
2)
Turn the small FMS Knob to select SYSTEM STATUS. The AUX-SYSTEM
STATUS Page is displayed. Note the System ID number in the AIRFRAME
field as seen in Figure 8-72. This number will be needed when contacting
Garmin Flight Data Services to establish the account.
3)
Turn the small FMS Knob to select REPORTS/DATA LINK.
4)
If necessary, select the REPORTS Softkey. The AUX-REPORT STATUS Page is
now displayed.
5)
Press the MENU Key. The Page Menu window is now displayed.
6)
Select ‘Register With GFDS’ in the menu list.
7)
Press the ENT Key. The Garmin Flight Data Service Registration window is
now displayed.
8)
Enter the Access Code provided by Garmin Flight Data Services.
9)
Press the ENT Key. REGISTER will now be highlighted.
10)
Press the ENT Key. System registration is complete when ‘REGISTERED’
is displayed in the STATUS field. Verify the information displayed in the
CURRENT REGISTRATION window is correct.
Disable/Enable Iridium Transceiver
Iridium telephone and data communications may be turned on or off by performing
these simple steps.
Disable/Enable Telephone and Low Speed Data Services:
1)
Turn the large FMS Knob on the MFD to select the AUX page group.
2)
Turn the small FMS Knob to select REPORTS/DATA LINK.
3)
If necessary, select the REPORTS Softkey. The AUX-REPORT STATUS Page is
now displayed.
4)
Press the MENU Key. The Page Menu window is now displayed.
5)
Turn the FMS Knob to select ‘Disable Iridium Transmission’ in the menu list.
6)
Press the ENT Key. The Iridium transceiver is now disabled.
7)
To enable the Iridium transceiver, repeat steps 1 through 4, then select
‘Enable Iridium Transceiver’.