Cockpit Reference Guide

190-00763-02 Rev. A
Garmin G1000 Pilot’s Guide for the Piper PA-46 Meridian
57
FLIGHT INSTRUMENTS
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EICAS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
Speeds(V
R
,V
X
,V
Y
,F10,F20,andF36)cannotbechanged,howeverthespeedagscanbeturnedon/off
from the Timer/References Window.  When active (on), the speed ags are displayed at their respective
locations to the right of the airspeed scale. By default, all speed flags are turned off when power is cycled.
Turning desired speeds flags on/off:
1) Select the TMR/REF Softkey.
2) Turn the large FMS Knob to highlight the ON/OFF field of the desired speed.
3) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.
4) To remove the window, press the CLR Key or select the TMR/REF Softkey.
Figure 2-5 Timer/References Window
Figure 2-6 Timer/References Menu
Turning all speed flags ON/OFF:
1) Select the TMR/REF Softkey.
2) Press the MENU Key.
3) To activate all speed flags, press the ENT Key with ‘All References On’ highlighted.
4) To remove all speed flags, turn the FMS Knob to highlight ‘All References Off’ and press the ENT Key.
Restoring all defaults:
1) Select the TMR/REF Softkey.
2) Press the MENU Key.
3) Turn the FMS Knob to highlight ‘Restore Defaults’ and press the ENT Key.