Cockpit Reference Guide

Garmin G1000 Pilot’s Guide for the Piper PA-46 Meridian
190-00763-02 Rev. A
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EICAS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
538
APPENDIX A
Message Comments
TRAFFIC FAIL – Traffic device has
failed.
The G1000 is no longer receiving data from the traffic system. The traffic device
should be serviced.
STRMSCP FAIL – Stormscope has
failed.
Stormscope has failed. The G1000 system should be serviced.
FAILED PATH – A data path has failed. A data path connected to the GDU or the GIA 63/W has failed.
MAG VAR WARN – Large magnetic
variance. Verify all course angles.
The GDU’s internal model cannot determine the exact magnetic variance for
geographic locations near the magnetic poles. Displayed magnetic course angles may
differ from the actual magnetic heading by more than 2°.
SVS – SVS DISABLED:Out of available
terrain region.
Synthetic Vision is disabled because the aircraft is not within the boundaries of the
installed database.
SVS – SVS DISABLED:Terrain DB
resolution too low.
Synthetic Vision is disabled because a terrain database of sufficient resolution (9 arc-
second or better) is not currently installed.
SCHEDULER [#] – <message>. Message criteria entered by the user.
COURSE SEL – Current track will not
intercept selected course.
The aircraft is flying away from the selected course and will not intercept.
CHECK CRS – Database course for
LOC1 / [LOC ID] is [CRS]°.
Selected course for LOC1 differs from published localizer course by more than 10
degrees.
CHECK CRS – Database course for
LOC2 / [LOC ID] is [CRS]°.
Selected course for LOC2 differs from published localizer course by more than 10
degrees.
[PFD1, PFD2, or MFD1] CARD 1 REM
– Card 1 was removed. Reinsert card.
The SD card was removed from the top card slot of the specified PFD or MFD. The SD
card needs to be reinserted.
[PFD1, PFD2, or MFD1] CARD 2 REM
– Card 2 was removed. Reinsert card.
The SD card was removed from the bottom card slot of the specified PFD or MFD. The
SD card needs to be reinserted.
[PFD1, PFD2, or MFD1] CARD 1 ERR
– Card 1 is invalid.
The SD card in the top card slot of the specified PFD or MFD contains invalid data.
[PFD1, PFD2, or MFD1] CARD 2 ERR
– Card 2 is invalid.
The SD card in the bottom card slot of the specified PFD or MFD contains invalid data.
EXCEEDANCE – Engine exceedance
data is being logged.
An engine exceedance log has been captured.
SPD KEY DISABLED - The SPD key is
disabled for this model aircraft.
The SPD Key on GMC 710 has no function in this aircraft model.